Procedure for Preventative Maintenance of Airtex Custom Sliding Doors
(Ocean Alexander Yachts) #
Purpose: #
This procedure outlines the recommended maintenance measures for the sliding doors installed on Ocean Alexander Yachts, specifically for the main salon and bridge deck entries. The goal is to extend the life of the door, rollers, and other moving components, ensuring smooth and efficient operation while minimizing the risk of costly repairs.
Frequency: #
- Quarterly Maintenance is recommended for optimal performance and longevity.
Materials Needed: #
- Biobased lubricant (e.g., vegetable oil)
- Clean, lint-free cloths
- Soft brush or vacuum with nozzle attachment
- Mild soap solution (optional)
- Small screwdriver or similar tool (optional, for roller access)
Procedure: #
- Preparation:
- Ensure the yacht is securely docked and that the area around the sliding doors is clear of any obstacles.
- Open the sliding door to its fully extended position.
- Inspect the general condition of the door, track, and surrounding components for any visible damage or wear.
- Cleaning the Rollers and Tracks:
- Rollers:
- Use a soft brush or vacuum nozzle to gently remove any dirt, debris, or small particles from the roller bearings. Avoid using excessive force to prevent damaging the rollers.
- If needed, use a mild soap solution and a clean cloth to wipe away any remaining dirt or grease buildup. Ensure the cloth is damp, not soaking wet, to prevent moisture from entering the rollers.
- Tracks:
- Clean the track with a dry cloth to remove any dust or debris. Avoid applying any cleaning solutions or lubricants directly to the track itself, as this could interfere with the roller’s performance.
- Rollers:
- Lubricating the Rollers:
- Lubricate the Roller Bearings ONLY:
- Apply a small amount of biobased lubricant (vegetable oil recommended) directly to the roller bearings. Use a cloth or applicator to carefully distribute the lubricant.
- Avoid applying lubricant to the rollers themselves or the track. Lubricating the track can prevent the roller from properly rolling and may create flat spots on the wheel, leading to damage and poor performance.
- Lubricate the Roller Bearings ONLY:
- Inspect for Wear or Damage:
- Check the rollers for signs of damage, excessive wear, or misalignment. If the rollers are cracked, worn down, or damaged in any way, they should be replaced immediately to prevent further damage to the door system.
- Examine the track for any irregularities or obstructions that could hinder the smooth movement of the rollers.
- Final Check:
- After lubrication and cleaning, move the door back and forth several times to ensure that it operates smoothly and without resistance.
- Confirm that the rollers are properly aligned and that the door slides freely without jerking or making unusual noises.
- Reassemble (if necessary):
- If any components were removed for access, such as the bottom or top track covers, reassemble them securely.
- Documentation:
- Record the date and details of the maintenance performed, including any replacements made or parts found to be in need of attention. This will help track the condition of the door system over time.
Recommendations: #
- Regular maintenance of the sliding door system will help prevent long-term damage and reduce the need for costly repairs.
- Always use biobased lubricants (such as vegetable oil) to ensure proper performance and avoid buildup on the rollers and track.
- If you notice any persistent issues with the door’s operation, such as difficulty opening or closing, unusual noises, or irregular movement, contact a professional technician for further inspection.
By following these maintenance procedures, you can ensure the smooth operation and extended lifespan of your Airtex custom sliding doors onboard Ocean Alexander Yachts.
Contact our Service Department today
(954.530.2033)
To learn how we can help ensure safe and peak performance for your vessel.
East Coast Yacht Group
2955 West State Road 84
Fort Lauderdale, FL 3331
